Detents, Three-dimensional parameter default values – Sony Multi Interface Shoe Adapter User Manual
Page 416
Cha
416
DME
Detents
The system defines points called detents at regular intervals on the three-
dimensional space. Pressing the [CTR] button
in the device control
block sets the current three-dimensional parameter values to the closest detent
points.
The following table shows the interval between successive detents for each
transformation operation mode
(see
a) When a value is smaller than 1, 1/Aspect or 1/Perspective (z) is adjusted to an integral value.
Three-dimensional parameter default values
Each of the transformation operation modes has default values for three-
dimensional parameters. If required, you can return the current value to the
defaults by pressing the [CTR]
button in the device control block
twice in rapid succession.
The following table shows the default parameter values for each
transformation operation mode.
Skew
–9.9999 to +9.9999
Operation mode
Limits of three-dimensional transformation parameters
Operation mode
Detent interval
Location XYZ
1.0000
Rotation, Spin
0.2500
Axis Location
1.0000
Location Size
0.2500
Aspect
1.0000
a)
Perspective (x, y)
Perspective (z)
1.0000
1.0000
a)
Skew
0.1000
Operation mode
Default value
Location XYZ
0.0000
Rotation, Spin
0.0000
Axis Location
0.0000
Location Size
1.0000
Aspect
1.0000
Perspective (x, y)
Perspective (z)
0.0000
1.0000
Skew
0.0000