Sony Multi Interface Shoe Adapter - Manual (Page 601)

601
Control of VTRs, Extended VTRs, and Disk Recorders
Chap
te
r 1
2
Ex
te
rnal
De
v
ic
e
s
If using the [STOP TC] button, each time you press the button the stop
point timecode is overwritten.
• Using the [SET STOP TC] button of the optional device control block
(search dial module):
Press the [SET STOP TC] button in the search dial module. The display
in the numeric keypad control block shows “STOP TC.” Enter the
desired timecode from the numeric keypad control block, and press
[ENTER].
• Using the [SET DUR] button of the optional device control block
(search dial module):
Press the [SET DUR] button in the search dial module. The display in
the numeric keypad control block shows “DUR” and the current setting.
Enter the desired duration from the numeric keypad control block, and
press [ENTER].
For details of timecode entry, see “Setting the start point and stop point
with the [SET XX] buttons” (page 602).
• Setting with the Cueup & Play menu:
For details of settings in the Cueup & Play menu, see “Setting the start
point, stop point, and start delay time in a menu” (page 604).
9
To set a start delay time, press the [DELAY] button in the device control
block, and enter a value in the numeric keypad control block.
Alternatively, make the setting in the Device >DDR/VTR >Cueup & Play
menu.
If no setting is required, continue to step
10 .
For details of settings in the Cueup & Play menu, see “Setting the start
point, stop point, and start delay time in a menu” (page 604).
10
Press the [STORE] button, turning it on, in the numeric keypad control
block.
11
Enter the number of the register in which to save the settings.
When overwriting the settings in the register recalled in step 3 , continue to
step 12 without changing the displayed register number.
12
Press the [ENTER] button.
This saves the settings in the register.