Setting a macro attachment to a fader lever – Sony Multi Interface Shoe Adapter User Manual

Page 757

757

Macro Attachment Assigning

Chap

r 1
6

Mac

ros

button, it is possible to set a macro attachment in macro only mode for that
button.

To check macro attachment settings

Hold down the [PRE MCRO] or [POST MCRO] button assigned to a utility/
shotbox control block button or user preference button. While this is held
down, the buttons for which a macro attachment is set flash as follows.

While the [PRE MCRO] button is held down:

• Buttons set in pre macro mode: flash amber
• Buttons set in macro only mode: flash green

While the [POST MCRO] button is held down:

• Buttons set in post macro mode: flash amber
• Buttons set in macro only mode: flash green

Setting a macro attachment to a fader lever

You can set a macro attachment to any particular position of a fader lever in the
transition control block.

Notes

• In macro only mode it is not possible to set a macro attachment.
• It is not possible to set a macro attachment to a fader lever in the downstream

key control block.

Recall the macro register that you want to assign to the fader lever.

For details of recall see page 732.

Move the fader lever to the position where you want to set the macro
attachment.

Hold down the [PRE MCRO] or [POST MCRO] button

assigned to a

utility/shotbox control block or user preference button, and press the
[LIMIT SET] or [PRIOR SET] button in the control block containing the
fader lever operated in step

1) Only when setting a macro attachment to the start point or end point of fader lever

operation, use [PRE MCRO] and [POST MCRO] in distinction, as follows.

To set the operation start point (0%):

hold down [PRE MCRO] for the operation.

To set the operation end point (100%):

hold down [POST MCRO] for the operation.

This assigns the register recalled in step

to the fader lever position

selected in step

To check a macro attachment setting

Hold down the [PRE MCRO] or [POST MCRO] button assigned to a utility/
shotbox control block or user preference button. While it is held down, the