Procedure for basic transition operation – Sony Multi Interface Shoe Adapter User Manual
Page 116
116
Procedure for Basic Transition Operation
Chapt
Procedure for Basic Transition Operation
The positions of the principal buttons used for basic transition operation are as
follows.
Transition control block
1
In the cross-point control block, select the background video with the
background A row of cross-point buttons.
2
Select the way in which the transition will affect the image, using the next
transition selection buttons in the transition control block.
For an overview, see “Selecting the Next Transition” (page 113).
To change the background:
Press the [BKGD] button, turning it on.
To insert or delete a key:
Press one of the [KEY1] to [KEY4] buttons (or
[DSK1] to [DSK4] buttons in the PGM/PST bank), turning it on.
To enable the key priority setting, which determines the key overlay
order after the transition:
Press the [KEY PRIOR] button, turning it
on.
You can press more than one button at the same time.
To change the keys and background presets in Setup menus
simultaneously:
Press the [ALL] button.
To allocate a particular next transition button to the [ALL] button
function, see “Operation Settings (Operation Menu)” in Chapter 19
(Volume 3).
BKGD
KEY1
KEY2
KEY3
KEY4
KEY
PRIOR
MIX
ALL
PST
COLOR
MIX
NAM
WIPE
SUPER
MIX
DME
PRIOR
SET
NORM
NORM
/REV
REV
TRANS
PVW
PTN
LIMIT
LIMIT
SET
KF
AUTO
TRANS
CUT
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
Next transition
selection buttons
Transition type
selection buttons
Transition execution
section