beautypg.com

Background settings, Applying the background effect, Selecting the signal to insert in the background – Sony Multi Interface Shoe Adapter User Manual

Page 563

background image

563

DME Special Effect Operations

Chapt

er

11

DME Ope

ra

tions

To undo a copy or swap

Press [Undo]. Settings are returned to their values before the copy or swap.

Background Settings

Adds a color or inputs an external signal to the background of the image.

Note

Signal selection for this purpose is not supported on the MVE-8000A and
MKS-6470.

Applying the Background effect

1

In the DME menu, select VF6 ‘Input/Output’ and HF1 ‘Bkgd.’

The Bkgd menu appears.

2

Press [Bkgd], turning it on.

The Background effect is enabled. Only if Flat Color is selected in the
group, you can adjust the parameters with the knobs.

3

Set the following parameters.

Selecting the signal to insert in the background

When using the MVE-9000, you can select the signal to insert in the
background.
With [Bkgd] set on, use the following procedure.

1

In the group, select one of the following.

Flat Color:

single color

Mix Color:

mix color signal set in the Color Mix menu

(see page 479)

Ext Video:

an external video signal input to the Ext IN connector

Knob

Parameter

Adjustment

Setting values

1

Luminance

Luminance

0.00 to 100.00

2

Saturation

Saturation

0.00 to 100.00

3

Hue

Hue

359.99 to 0.00