Sony Multi Interface Shoe Adapter - Manual (Page 481)

481
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
Defocus Settings
Applying the Defocus effect
1
In the DME menu, select VF2 ‘Video Modify’ and HF1 ‘Defocus/Blur.’
The Defocus/Blur menu appears.
2
Press [Defocus], turning it on.
The Defocus effect is enabled. You can adjust the defocusing of video and
key signals with the knobs.
Note
On the MVE-8000A and MKS-6470, the Defocus and Glow effects cannot
be enabled at the same time. The effect which was turned on most recently
is enabled.
3
In the group, select the signal to which to apply the
defocus effect.
Video/Key: Video signal and key signal
Video: Video signal only
Key: Key signal only
Note
“Key” can be selected only when the MVE-8000A/MVE-9000 is
connected through an SDI interface.
4
Set the parameters.
• When Video/Key is selected (with MKS-6470)
• When Video/Key is selected (with SDI-interfaced MVE-8000A/
MVE-9000)
Knob Parameter Adjustment Setting values
1 H Horizontal defocusing of video
and key signals 0.00 to 100.00
2 V Vertical defocusing of video and
key signals 0.00 to 100.00
3 All Horizontal and vertical
defocusing of video and key
signals H value shown