beautypg.com

Sony Multi Interface Shoe Adapter User Manual

Page 299

background image

299

Frame Memory Clip Operations

Cha

p

te

r 7

F

ra

m

e Memor

y

To specify the playback stop point

Start playback, and at the desired position press the [STOP] button to stop
playback, then press the [STOP TC] button. To set to any position, press the
[SET STOP TC] button, and enter a timecode from the numeric keypad control
block.

To carry out the variable speed playback

Use the search dial.

For details on using the search dial, see “Controlling the Tape/Disk
Transport” in Chapter 12 (Volume 2).

To apply a loop to a frame memory clip

Press the [LOOP] button.

Using the device control block (MKS-8031TB trackball module,
option) to play back clips

Note

A frame memory clip must first be recalled with a menu operation.

1

Press the [DEV] button in the region selection buttons, and select the frame
memory clip for playback (FM1 CLIP to FM8 CLIP).

If the pair mode is on, both main and subsidiary FMs light.

2

Press the [PLAY] button, turning it on.

To stop playback, press [STOP] or any of the [SHTL], [JOG], [CUE],
[REW], [FF], and [ALL STOP] buttons.

For details of the buttons in the device control block (MKS-8031TB trackball
module, option), see “Device Control Block (MKS-8031TB Trackball Module,
Option)” (page 68) i
n Chapter 2.

For details of the playback start point, stop point, and duration settings, see the
previous item, “Using the device control block (MKS-8036A Search Dial
Module, option) to play back clips” (page 298).

To carry out the variable speed playback

Press any of the [SHTL], [JOG], and [VAR] buttons, then turn the Z-ring or
move the joystick. The image changes in the forward direction when you turn
the Z-ring clockwise, and in the reverse direction when you turn it
counterclockwise. Move the joystick to the right for the forward direction and
to the left for the reverse direction.