Setting the format converter inputs, Making detailed settings for up-conversion – Sony Multi Interface Shoe Adapter User Manual
Page 960

Chapt
960
Signal Input Settings (Input Menu)
Setting the Format Converter Inputs
Selecting the format converter inputs to be set (inputs 1 to 8)
1
Display the Switcher >Input >FC Adjust menu.
2
Using any of the following methods, select what the setting applies to.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Making detailed settings for up-conversion
1
In the Switcher >Input >FC Adjust menu, select the input to which the
setting applies.
2
Press [Format Converter], turning it on.
This enables format conversion.
3
In the
Frame:
Conversion in frame units
Field:
Conversion in field units
Adaptive:
Automatically switching between the above two modes
When Adaptive is selected, adjust the following parameter.
a) 1: Still priority mode, 2: Standard mode, 3: Motion priority mode
4
In the
Edge Crop:
Add black bars on the left and right sides of a 4:3 aspect ratio
image to convert it to a 16:9 image.
Letter Box:
Crop the top and bottom of a 4:3 aspect ratio image to convert
it to a 16:9 image.
Squeeze:
Stretch a 4:3 image horizontally to covert it to a 16:9 image.
Knob
Parameter
Adjustment
Setting values
1
Source No
Input selection
1 and upwards
Knob
Parameter
Adjustment
Setting values
2
Motion Select
Motion detection
sensitivity
1 to 3
a)