Sony Multi Interface Shoe Adapter - Manual (Page 475)

475
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
To set the pattern size and position
1
In the Wipe Crop menu, press [Position/Size].
2
Set the following parameters.
The setting range for the parameters depends on the signal format (SD/
HD) and aspect ratio (4:3/16:9) selected in the system, as follows.
• For SD format
a) For 4:3 mode
b) For 16:9 mode
Note
When pattern number 304 is selected, the effect of settings in the
group varies with the Size setting.
• For HD format
a) For 4:3 mode
b) For 16:9 mode
Note
When pattern number 304 is selected, the effect of settings in the
group varies with the Size setting.
To invert the regions of the cropping
In the Wipe Crop menu, press [Invert], turning it on.
Knob Parameter Adjustment Setting values
1 H Horizontal position –8.00 to +8.00
2 V Vertical position
–6.00 to +6.00
a)
–4.50 to +4.50
b)
3 Size Pattern size 0.00 to 100.00
5 Pattern Pattern number 1 to 24, 304
Knob Parameter Adjustment Setting values
1 H Horizontal position
–24.00 to +24.00
a)
–32.00 to +32.00
b)
2 V Vertical position –18.00 to +18.00
3 Size Pattern size 0.00 to 100.00
5 Pattern Pattern number 1 to 24, 304