Sony Multi Interface Shoe Adapter User Manual
Page 943
943
Operation Settings (Operation Menu)
Chap
[KEY] button operation mode for key source bus operations:
For key
source bus operations, specify the operation mode of the [KEY] button
in the auxiliary bus control block in the
Key:
If you select this, the [KEY] button is always unlit, and this mode
allows only key signals to be selected with the cross-point buttons.
Video & Key:
The [KEY] button is enabled, and either video or key
signals can be selected.
CCP-9000/9000A-specific button settings:
Press [CCP-9000 Button],
and skip to step
3
.
3
If required, make the following settings.
DME channel selection mode:
To set the mode when one of the [DME1]
and [DME2] buttons in the key delegation section is pressed to select
the DME channel, select either of the following in the
group.
Override:
Forcibly select the selected channel. (Later selection takes
precedence).
Pre Select:
It is not possible to select a channel that has already been
otherwise selected. (Earlier selection takes precedence.)
Operation mode of the [XPT HOLD] button in the key delegation
section:
To set the operation mode of the [XPT HOLD] button in the
key delegation section, select either of the following in the
A/B Bus:
When the [XPT HOLD] button is pressed, turning it on,
cross-point hold is enabled for the A and B buses only.
All Bus:
When the [XPT HOLD] button is pressed, turning it on,
cross-point hold is enabled for all buses used on the bank being
currently operated.
(A/B buses, Key 1 to Key 4 buses, Utility bus, external DME bus)
Setting Trackball, Joystick, Search Dial, and Double-
Click Sensitivity
You can set the operational sensitivity for trackball, joystick and the buttons
which recall the relevant menus when pressed twice, and the relation of the
rotation angle of search dial with the playback speed.
1
In the Panel >Operation menu, press the [Sensitivity].
The Sensitivity menu appears.
The status area shows a list of the items with their settings.