Sony Multi Interface Shoe Adapter User Manual

Page 58

Names and Functions of Parts of the Control Panel

Ch
apt

ALL:

Select all regions. When any region

is already selected, pressing this button
makes all regions unselected.

M/E 1 and P/P:

Select the corresponding

regions, M/E-1 and PGM/PST.

USER 1 to USER 8:

Select the

corresponding User regions.

DME1 and DME2:

Select a DME channel.

P-Bus:

Select the P-Bus region.

GPI:

Select the GPI region.

RTR:

Select the router region.

DEV1 to DEV12:

Select the Device 1 to

Device 12 regions respectively.

MCRO:

Select the macro region.

Function selection buttons

UNDO:

After recalling a register, press this

button to return to the state before
recalling the register.

STORE STATS (store status):

This lights

amber when data is stored in a register.
After saving data to a register, hold
down this button and press the
[UNDO] button to return the register to
the state before the data was saved.

STORE:

Press this button to switch to the

mode for saving a snapshot, effect,
shotbox or macro in a register.

RCALL (recall):

Press this button to

switch to the mode for recalling a
snapshot, effect, shotbox or macro
from a register.

[STORE] button or [RCALL] button
flashes amber when one or more of the
regions assigned to the Region selection
buttons are not selected by the Region
Select menu.

Numeric keypad

In addition to the buttons for numeric input,
this includes buttons for adding attributes to
snapshots.

0 to 9:

Used to input numeric digits.

. (period):

Enters the decimal point.

When the [TRANS RATE] button is lit,
enters “00.” When the [EFF] button,

[SNAPSHOT] button or [SHOTBOX]
button is lit, this is used to find an
empty register.

+/–/ EFF DISS (effect dissolve):

Invert the

sign, negative or positive.
When the [SNAPSHOT] button is lit,
applies the effect dissolve attribute to a
snapshot.

CLR/AUTO TRANS (clear/auto

transition):

Clear an input value,

returning to the previous state.
When the [SNAPSHOT] button is lit,
applies the auto transition attribute to a
snapshot.

TRIM/GPI ENBL (enable):

After

entering a difference value to be added
to an existing setting, press this button
to confirm the change.

ENTER:

Confirm an entered value.

Display

This shows the selected region name and
entered numeric values.