Sony Multi Interface Shoe Adapter - Manual (Page 958)

Chapt
er
2
0
Swit
c
her Se
tu
p
(S
wit
c
her)
958
Signal Input Settings (Input Menu)
Signal Input Settings (Input Menu)
For setup relating to signal inputs, use the Switcher >Input menu.
To display the Input menu
In the Engineering Setup menu, select VF3 ‘Switcher’ and HF2 ‘Input.’
The status area shows source numbers and source names, input signal phase,
and through mode on/off setting.
The following functions are available here.
•
Input Phase Adjust: Carry out phase adjustment for each primary input.
• Through Mode: Set through mode for the input side. This applies only to
the primary inputs, and can be set independently for each primary input.
• Video Process: Switch video processing on or off for each input signal, and
adjust the brightness, hue and so forth.
• Matte Illeg. Color Limit: Switch the illegal limiter on or off for the signal
generated by the switcher internal matte generator.
• FC Adjust: Set the format converter inputs.
Making Phase Adjustment and Through Mode Settings
1
In the Switcher >Input menu, select the input signal to which the settings
apply.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The selected input signal appears in reverse video.
2
Press [Input Phase Adj].
3
To adjust the phase, adjust the following parameter.
4
To enable through mode, press [Through Mode], turning it on.
Knob Parameter Adjustment Setting values
1 Src No Input signal selection 1 to 49
Knob Parameter Adjustment Setting values
2 Phase Input signal phase –16 to +16