beautypg.com

Shotbox register creation – Sony Multi Interface Shoe Adapter User Manual

Page 712

background image

Cha

p

te

r 15

Ut
ilit
y/

S

hot

bo
x

712

Shotbox Register Creation

Shotbox Register Creation

You can create (save) shotbox registers in the following control blocks.
• Numeric keypad control block

(See “Numeric Keypad Control Block” in

Chapter 2 (Volume 1).)

• Menu control block

(See “Menu Control Block” in Chapter 2 (Volume 1).)

Creating a Shotbox Register in the Numeric Keypad
Control Block

When you create a shotbox register in the numeric keypad control block, you
carry out separate operations in respect of the snapshot setting data and the
effect setting data, and save in the register. The procedure described here
makes the snapshot settings first, followed by the effect settings.

Creating a shotbox register

1

In the numeric keypad control block, press the [SNAPSHOT] button,
turning it on.

This assigns the numeric keypad control block to snapshot operations.

2

Specify the register number of the snapshot you want to save in a shotbox
register, and then recall it for each region.

For details of the procedure for recalling a register, see “Recalling a
snapshot from the numeric keypad control block” (page 693).

3

Press the [SHOTBOX] button, turning it on.

This assigns the numeric keypad control block to shotbox operations.

4

Press the [STORE] button, turning it on.

The [SNAPSHOT] button lights green.
If not lighted, press the [SNAPSHOT] button to turn it on.

Note

Only in [SHOTBOX] operation mode with the [STORE] button lit, the
[SNAPSHOT] button or [EFF] button lights green to indicate that a setting