With the numeric keypad, enter the transition rate, Numeric keypad control block – Sony Multi Interface Shoe Adapter User Manual
Page 131
131
Executing a Transition
Cha
Frame display mode:
Values are shown as from 0 to 999 frames. In this
display mode, a value entered in timecode input mode is converted for
display as a number of frames.
Timecode display mode:
Values are shown as timecode values, consisting of
seconds and frames. In this display mode, a value entered in frame input
mode is converted for display as a timecode value. If the value consists of
four or more digits, the last digit is not shown.
Example:
A value of 9 seconds 23 frames appears as “9.23” and a value
of 10 seconds 1 frame appears as “10.0.”
Setting the transition rate in the numeric keypad control block
Numeric keypad control block
1
In the numeric keypad control block, press the [TRANS RATE] button.
2
Press the region selection button for the M/E or PGM/PST bank for which
you want to set the transition rate, turning it on.
The numeric keypad control block display now shows the selected region
name and the current transition rate setting for the region.
3
With the numeric keypad, enter the transition rate.
EFF
SNAP
SHOT
SHOT
BOX
MCRO
UNDO
STORE
STATS
MASTR
ALL
P-BUS
GP1
STORE
RCALL
7
8
9
4
5
6
1
2
3
0
+/-
EFF
TRIM
CLR
AUTO
DISS
TRANS
ENBL
GPI
ENTER
DME
1
DME
2
DME
3
DME
4
M/E
1
USER
1
USER
2
P/P
P/P
M/E
1
AUX
1
AUX
2
AUX
3
AUX
4
AUX
5
AUX
6
AUX
7
FMS
1
FMS
2
EDIT
PVW
KEY
SHIFT
TRANS
RATE
TRANS RATE button
Region selection buttons
Display
Numeric keypad
ENTER button