Sony Multi Interface Shoe Adapter - Manual (Page 944)

Ch
apt
er 19
C
o
nt
rol P
ane
l
S
e
tup (P
an
el)
944
Operation Settings (Operation Menu)
2
Make the following settings as required.
Trackball and Z-ring sensitivity in normal mode: In the
Normal Mode> group, select [
Ч
1], [
Ч
2], or [
×
4].
Trackball and Z-ring sensitivity in fine mode: In the
Mode> group, select [
1
/
2
], [
1
/
4
], or [
1
/
8
].
Joystick sensitivity in normal mode: In the
group, select [
Ч
1], [
Ч
2], or [
×
4].
Joystick sensitivity in fine mode: In the group,
select [
1
/
2
], [
1
/
4
], or [
1
/
8
].
Touch sensitivity for recalling menus by double-clicking buttons: In
the group, select [Fast], [Normal], or [Slow].
Search dial rotation angle to attain the same playback speed: In the
group, select [Narrow] or [Wide].
Specifying Main Split Fader
In the
Note
This setting is disabled for the CCP-9000/9000A.
Setting the Macro Execution Mode
1
Press [Macro] in the Panel >Operation menu.
The Macro menu appears.
2
In the group, select the macro execution mode.
Normal: normal execution mode
Step: step execution mode
3
In the group, set the macro editing mode of the
standard type Flexi Pad to [Pause Only] or [Full Editing].
This enables the standard type Flexi Pad control block to be used for macro
editing. Depending on the macro editing mode setting, functions are
assigned to the memory recall buttons as shown in the following figure.