Sony Multi Interface Shoe Adapter - Manual (Page 458)

Cha
p
te
r 11
DME
O
per
at
ion
s
458
DME Special Effect Operations
The outline only effect is enabled.
Art Edge Settings
Note
The Art Edge function is not supported on the MVE-8000A and MKS-6470.
Applying art edges
1
In the DME menu, select VF1 ‘Edge’ and HF4 ‘Art Edge.’
The Art Edge menu appears.
2
Press [Art Edge], turning it on.
This enables art edges, and you can now use the knobs to adjust the
parameters.
Note
The Defocus, Blur, Key Border, and Glow effects cannot be applied to the
Art Edge sections.
3
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
Parameter group [1/2]
Knob Parameter Adjustment Setting values
1 H Simultaneously adjust width of left
and right edges Value of Left shown
2 V Simultaneously adjust width of top
and bottom edges Value of Top shown
3 All Simultaneously adjust width of all
four edges Value of Left shown
5 Density Density of edges 0.00 to 100.00