Sony Multi Interface Shoe Adapter User Manual
Page 925

925
Setting Button Assignments (Prefs/Utility Menu)
Chap
When Utility Command is selected:
A list of commands appears on the
right of the status area; using any of the following methods, select the
command you want to assign.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
a) When the Command parameter is set to Sw’er GPI Test Fire, Panel GPI Test Fire, DCU
GPI, or Test Fire
When Macro Recall is selected:
Turn the knob to select the macro
register you want to assign.
When Shotbox Recall is selected:
Turn the knob to select the shotbox
register you want to assign.
5
Press [Action Set].
This assigns the selected action, which is reflected in the status area.
In the utility/shotbox control block, the assigned button lights orange.
If a shotbox register was assigned, the register name appears.
To cancel an assignment
After selecting the relevant button, press [Clear].
List of utility commands and memory recall button status
The following table shows the utility commands that can be assigned to
memory recall buttons.
Knob Parameter
Adjustment
Setting
values
3
Command
Utility command selection
1 and upwards
4
a)
GPI No
GPI port number
1 and upwards
Knob Parameter
Adjustment
Setting
values
3
Macro
Macro register selection
1 to 99
Knob Parameter
Adjustment
Setting
values
3
Shotbox
Shotbox register selection
1 to 99
Command name
a)
Function
Button status
Lit green
Lit orange
SWR Remote1 Enbl
|
SWR Remote2 Enbl
Switcher Remote 1 enabled/disabled
|
Switcher Remote 2 enabled/disabled
Enabled
Disabled
DME1 Editor Port Enbl DME1 editor port enabled/disabled
Enabled
Disabled