Sony Multi Interface Shoe Adapter - Manual (Page 330)

330
Misc Menu Operations
Cha
p
te
r 8
Colo
r Bac
k
g
rou
nds
, Cop
y
an
d Sw
ap
, and
O
th
e
r Set
tings
Enabling or disabling control from the editing keyboard
1
In the menu control block, press the top menu selection button [MISC],
then select VF1 ‘Enable’ and HF2 ‘Plug-In Editor.’
The Misc >Enable >Plug-In Editor menu appears.
2
In the group, press [Editor Enable].
Each time you press the button toggles between enable and disable.
To enable control of the preview bus only
When control from the editing keyboard is disabled (when [Editor Enable] is
set to Disable), to enable control of the preview bus only, press [PVW Bus
Enable] in the group.
Safe Title Settings
Switching the safe title function on or off
1
In the menu control block, press the top menu selection button [MISC] and
select VF2 ‘Safe Title.’
The Misc >Safe Title menu appears.
2
Using any of the following methods, select the signal to which the settings
apply.
• Directly press the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
Notes
• It is not possible to change the setting for the output for which the safe
title is set off in a Setup menu.
• The safe title function cannot be used for output signals for which
through mode is set to Enable in a Setup menu.
For more information about the Setup menu settings referred to above, see
“Signal Input Settings (Input Menu)” and “Signal Output Settings (Output
Menu)” in Chapter 20 (Volume 3).
Knob Parameter Adjustment Setting values
1 Output Signal to which the settings
apply 1 to 48