Spotlighting settings – Sony Multi Interface Shoe Adapter User Manual
Page 545
545
DME Special Effect Operations
Chapt
Mix Color:
Insert a mix color signal
in the afterimage portion.
Ext Video:
Insert the external video signal input to the Ext IN connector in the
afterimage portion.
Rainbow:
Use a freeze image with the hue changing every frame in the
afterimage portion. The difference from “Hue Rotate” is that many colors
appear simultaneously.
For details of the Rainbow parameters, see the “Hue Rotate” item above.
Applying modulation to the afterimage portion (Modulation)
1
In the Wind menu, press [Modulation], turning it on.
2
Set the following parameters.
For details of Priority, Wind Freeze Timing, Wind Eraser, Defocus, Dust, and
Combine Process in the Wind menu, see “Trail Settings” (page 535).
Spotlighting Settings
You can set up to three light sources (lights 1 to 3).
Notes
• The Spotlighting effect is not supported on the MVE-8000A and MKS-6470.
• The BZDM-9050 Texture Lighting Software (for MVE-9000) is required to
set lights 2 and 3.
• When the global effect Combiner is enabled, the settings of the smallest-
numbered channel selected for the Combiner are used.
2
Saturation
Saturation
0.00 to 100.00
3
Hue Speed
Rate at which hue changes
–12.00 to +12.00
Knob
Parameter
Adjustment
Setting values
Knob
Parameter
Adjustment
Setting values
1
Amp H
Horizontal amplitude of the
wave
0.00 to 100.00
2
Freq H
Horizontal frequency of the
wave
–100.00 to +100.00
3
Amp V
Vertical amplitude of the
wave
0.00 to 100.00
4
Freq V
Vertical frequency of the
wave
–100.00 to +100.00