Drop shadow settings – Sony Multi Interface Shoe Adapter User Manual
Page 473

473
DME Special Effect Operations
Chapt
(For HD format and 16: 9 mode: Size V = 1.50)
6
Press [Skew], turning it on, and use knob 1 to set the Skew H parameter so
that the parallel lines appear to emerge from the depth at the right.
(For HD format and 16:9 mode: Skew H = –50.00)
Drop Shadow Settings
Notes
• Drop shadow effect is available for MKS-6470 only.
• It is not possible to use drop shadow simultaneously with the trail, motion
decay, or keyframe strobe function.
1
In the DME menu, select VF1 ‘Edge’ and HF5 ‘Flex/Drop Shadow.’
The Flex/Drop Shadow menu appears.
2
Press [Drop Shadow], turning it on.
This enables drop shadow, and you can now adjust the parameters with the
knobs.
3
Adjust the following parameters.
The parameter ranges depend on the combination of signal format (SD/
HD) and aspect ratio (4:3/16:9) selected for the system as follows.
• In 4:3 mode
• In 16: 9 mode
Knob
Parameter
Adjustment
Setting values
1
H
Move shadow horizontally
– 8.00 to + 8.00(SD)
– 24.00 to + 24.00(HD)
2
V
Move shadow vertically
– 6.00 to 0.00(SD)
– 18.00 to 0.00(HD)
5
Density
Shadow density
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
H
Move shadow horizontally
– 8.00 to + 8.00(SD)
– 32.00 to + 32.00(HD)
2
V
Move shadow vertically
– 4.50 to 0.00(SD)
– 18.00 to 0.00(HD)
5
Density
Shadow density
0.00 to 100.00