Sony Multi Interface Shoe Adapter User Manual
Page 171
171
Key Setting Operations Using Menus
C
2
Select the edge type in the
For an overview of the key edge modifications, see “Edge modifiers”
(page 153).
Normal:
unadorned edge
Border:
edge with border applied
Drop Border:
edge with drop border applied
Shadow:
edge with shadow applied
Outline:
edge used as outline
Emboss:
embossing effect applied to edge
If you select [Normal], skip to step
7
.
3
Set the border width and other parameters.
When border or outline is selected:
The setting parameters depend on
the key type and whether the separate edge function is enabled or not.
To enable the separate edge function, press [Separate Edge], setting it
on.
• Separate edge off
a) In the “4H mode” and when [Fine Key] (page 173) is on, the setting value range is 0.00
to 4.00.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The left, right, top, and bottom border or outline widths can be adjusted
independently. The separate edge function is only valid when a
luminance key, linear key, or chroma key is selected as the key type.
a) In the “4H mode” and when [Fine Key] (page 173) is on, the setting value range is 0.00
to 4.00.
Knob
Parameter
Adjustment
Setting values
1
Width
Width
0.00 to 8.00
a)
(0.00 to 100.00)
b)
3
Density
Density
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Top
Top edge width
0.00 to 8.00
a)
2
Left
Left edge width
0.00 to 8.00
a)
3
Right
Right edge width
0.00 to 8.00
a)
4
Bottom
Bottom edge width
0.00 to 8.00
a)
5
Density
Density
0.00 to 100.00