Image processing, Combining the background image and input signal – Sony Multi Interface Shoe Adapter User Manual
Page 281
281
Still Image Operations
Cha
To display the subsidiary file in front
With the direct recall mode on, press [Sub Display], turning it on.
Image Processing
You can combine the background image (a still image file allocated to any of
FM1 to FM8, a freeze image written to temporary memory, or a black signal)
and the input signal.
The following types of processing are available.
Pattern key:
Using the signal from a dedicated pattern generator, you can cut
out the background image and insert the signal selected on the frame
memory source bus or a color matte signal. You can adjust the size and
position of the pattern, and add modifiers.
External key:
When processing an image in FM1 (3, 5, 7), you can use the
signal selected on the frame memory source bus 2 to cut out the
background image, and fill with the signal selected on the frame memory
source bus 1, or a color matte signal.
When processing an image in FM2 (4, 6, 8), you can use the signal selected
on the frame memory source bus 2 to cut out the background image, and
fill with a color matte signal (always white).
Note
An external key can only be used when the pair mode is enabled
(see page
MIX:
Mix the background image with the signal selected on the frame memory
source bus or color matte signal. The mix ratio can be set.
NAM:
Non-additive mix the background image with the signal selected on the
frame memory source bus or color matte signal.
Combining the background image and input signal
1
In the Frame Memory menu, select VF1 ‘Still’ and HF3 ‘Composite.’
The Composite menu appears.
2
In the frame memory selection area, select the FM to be assigned.
(See
.
)
3
To select V/K mode, press [V/K Mode], turning it on.