Sony Multi Interface Shoe Adapter User Manual
Page 454
Cha
454
DME Special Effect Operations
Signs of numeric settings
For H, V, and All settings, the sign (+/–) of the setting need not be
considered. For example, in the case of an H setting, the value for Left is
automatically regarded as a negative value, and the value for Right as a
positive value, to display the image.
The following is an example of these settings.
4
To soften the edges of the image, press [Edge Soft], turning it on, and set
the following parameter.
Note
Edges cannot be softened when the Crop effect is disabled.
To specify whether to invert the crop area when inverting the video
image
In the
Crop –> Invert:
Set an axis of symmetry at the center of the input video, and
invert both the desired area of video and the crop area horizontally and
vertically around that axis of symmetry. The order of effect application is
Crop > Invert.
Invert –> Crop:
Set an axis of symmetry at the center of the input video, and
invert only the desired area of video horizontally and vertically around that
axis of symmetry. The order of effect application is Invert > Crop.
2
Left
Crop position on left side
–4.00 to +4.00 (SD)
–16.00 to +16.00 (HD)
3
Right
Crop position on right side
–4.00 to +4.00 (SD)
–16.00 to +16.00 (HD)
4
Bottom
Crop position on bottom side
–2.25 to +2.25 (SD)
–9.00 to +9.00 (HD)
Parameter group [2/2]
Knob
Parameter
Adjustment
Setting values
Parameter
Entered
value
Setting
H
1.5
Left=–1.50
Right=1.50
–1.5
Left=–1.50
Right=1.50
Knob
Parameter
Adjustment
Setting values
1
Soft
Softness of edges
0.00 to 100.00