Defocusing the afterimage portion (defocus), Applying stardust to the afterimage portion, Setting a combine process – Sony Multi Interface Shoe Adapter User Manual
Page 538

Cha
538
DME Special Effect Operations
Note
The freeze timing setting is not required when the following signal formats are
being used.
Signal formats: 720P/59.94, 720P/50
Defocusing the afterimage portion (Defocus)
Notes
• Defocus is possible using a second DME.
• The function to defocus the trail afterimage portion is not supported on the
MVE-8000A and MKS-6470.
1
Press [Defocus], turning it on.
2
Set the following parameters.
Applying stardust to the afterimage portion
The afterimage portion becomes stardust, and gradually disappears.
1
Press the [DUST] button, turning it on.
2
Set the following parameters.
a) The way in which the afterimage disappears is affected by both Decay and Trail Dust
parameter adjustments.
Setting a combine process
Select whether to add the Trail effect before or after the combine.
Knob
Parameter
Adjustment
Setting values
1
Defocus V
Defocusing of the video
signal
0.00 to 100.00
2
Defocus K
Defocusing of the key
signal
0.00 to 100.00
Knob
Parameter
Adjustment
Setting values
1
Trail Dust
Amount of the afterimage
disappearing as stardust
a)
0.00 to 100.00
2
Dust Soft
Timing with which stardust
disappears
0.00 to 100.00
3
Dust Size
Size of stardust
0.00 to 100.00
4
Dust Aspect
Aspect ratio of stardust
–100.00 to +100.00