Freeze settings, Applying the hard freeze effect, Applying the time strobe effect – Sony Multi Interface Shoe Adapter User Manual
Page 499

499
DME Special Effect Operations
Chapt
Freeze Settings
Freezes the input video. The following types are available:
Hard Freeze:
Freezes the input video at an arbitrary timing.
Time Strobe:
Freezes the input video at specified intervals for a specified
length.
Film:
Slows the apparent frame rate, for an effect like film. You can specify
the ratio of advancement.
For Hard Freeze and Time Strobe, you can select the first field or the frame as
the freeze timing.
Note
When 720P signal format is used, the Film mode cannot be selected.
To apply a Freeze effect, start by displaying the Freeze menu. In the DME
menu, select VF3 ‘Freeze’ and HF1 ‘Freeze.’
Applying the Hard Freeze effect
1
In the
Frame:
Freeze one frame of signal.
Field 1:
Freeze the first field of signal.
2
In the
The Hard Freeze is executed, displaying a still image.
Applying the Time Strobe effect
1
In the
1
2
Image 3:
State with [Effect Gp1] and [Effect Gp2] set to On
The border or beveled
edge effect is also
masked.