Sony Multi Interface Shoe Adapter - Manual (Page 1039)

1039
Tally Generation Settings (Tally Enable Menu)
Chap
te
r
2
3
Se
tup
Re
lat
ing t
o
Rout
er I
n
te
rf
a
c
e
a
nd T
a
lly
(Ro
u
te
r/
T
a
lly
)
Enable: Always generate a tally.
Disable: Never generate a tally.
Tally Input: Generate a tally from the tally input state.
4
When you selected Tally Input as the tally generation mode in step 3 ,
select either of the following in the group.
DCU1: Generate tally with reference to signal input to DCU1 port. Set the
port number with the knob.
DCU2: Generate tally with reference to signal input to DCU2 port. Set the
port number with the knob.
5
Turn the knob to select the tally input port number.
6
Press [Execute].
This sets the settings made in steps 2 to 5 as the settings for tally
generation.
Modifying Tally Generation
1
In the Router/Tally >Tally Enable menu, press [Modify].
The Modify menu appears.
2
With reference to steps 2 to 5 in the preceding section “Making new tally
generation settings,” change the parameters as required.
3
Press [Execute].
This modifies the tally generation settings.
Deleting Tally Generation Settings
1
Using either of the following methods in the Router/Tally >Tally Enable
menu, select the tally generation entry you want to delete.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Knob Parameter Adjustment Setting values
5 Input No Tally input port number 1 to 102