Luminance processing operations – Sony Multi Interface Shoe Adapter User Manual
Page 352

Ch
apt
352
Color Corrector Functions
3
In the
Dark:
dark clip adjustment
White:
white clip adjustment
4
Adjust the following parameters.
a) When Dark is selected
b) When White is selected
To return the parameters to their default settings
In the
Luminance Processing Operations
After converting a signal to which RGB color correction has been applied to a
YUV signal, divide the luminance levels into three regions, referred to as Dark,
Middle, and Bright, and apply video signal adjustments to these regions.
There are three modes for luminance processing, as follows.
Tint mode:
adding a specified color to the original video signal.
Color Modify mode:
adjusting the original video signal.
Y Modify mode:
adjusting the output levels of the input luminance signal.
• White balance adjustment: setting the output level for an input
luminance signal at the 100% level.
• Black balance adjustment: setting the output level for an input
luminance signal at the 0% level.
Knob Parameter
Adjustment
Setting
values
1
Red
Red signal adjustment
–50.00 to +149.99
a)
–49.99 to +150.00
b)
2
Green
Green signal adjustment
–50.00 to +149.99
a)
–49.99 to +150.00
b)
3
Blue
Blue signal adjustment
–50.00 to +149.99
a)
–49.99 to +150.00
b)
4
All
Simultaneous RGB adjustment
Red value is shown
Under Dark point
Middle/Dark point
Bright/Middle point
Over Bright point
Dark
Middle
Bright
Input signal
luminance level