Making 9-pin port device interface settings – Sony Multi Interface Shoe Adapter User Manual
Page 986
Chapt
986
Interfacing With External Devices (Device Interface Menu)
Interfacing With External Devices (Device
Interface Menu)
To carry out setup relating to connections with external devices, display the
Switcher >Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF3 ‘Switcher’ and HF7 ‘Device
Interface.’
The following functions are available here.
•
Remote Assign:
Set the use of the two 9-pin ports.
•
GPI Input:
Set the GPI input ports and trigger polarities, and make the
action settings.
•
GPI Output:
Set the GPI output ports and trigger polarities, and make the
action settings.
•
Aux Control:
Set whether operations on the AUX buses from the two 9-pin
ports are inhibited.
•
DME Type Setting:
When the second DME is an MVE-9000 or MVE-
8000A, set the AUX bus outputs and reentry inputs for an SDI interface.
Making 9-Pin Port Device Interface Settings
The description in this section takes the REMOTE1 port as an example. For
other REMOTE ports, carry out the same process as required.
1
In the Switcher >Device Interface menu, press [Remote Assign].
The Remote Assign menu appears.
2
Select the device interface you want to set for the REMOTE1 port from the
Editor A:
assign Editor A to the REMOTE1 port.
Editor B:
assign Editor B to the REMOTE1 port.
AUX:
assign AUX to the REMOTE1 port.
DME1:
assign DME1 to the REMOTE1 port.