Sony Multi Interface Shoe Adapter - Manual (Page 868)

C
h
ap
te
r 1
8
Sy
ste
m
S
e
tu
p
(S
ys
te
m
)
868
Installation and Device Setup (Install/Unit Config Menu)
8
Press [Install].
The “Install” box shows “On,” confirming that this is to be installed. To
cancel this installation setting, press “Install” once more, making the box
blank.
9
To carry out the installation, press [Execute].
A confirmation message appears.
10
Select [Yes].
This carries out the installation, and when it completes normally, the
“Install” box shows “OK.”
Saving a Frame Memory Clip With Ancillary Data
1
In the System >Install/Unit Config menu, select [SWRx], and press [Unit
Config].
The Unit Config menu appears.
2
Press [FM Ancillary], turning it on.
On: Save with ancillary data.
Off: Save without ancillary data.
Note
Enabling this selection by pressing [Execute] in the following step
reinitializes all frame memory data. Make backups of required data
beforehand.
3
Press [Execute].
A popup window appears, displaying a message.
4
Check the message, and select [Yes].