Sony Multi Interface Shoe Adapter User Manual
Page 788
Chapt
788
Operations on Individual Files
2
In the device selection area on the left, select [Register].
3
In the device selection area on the right, select where the file is held
([HDD] or [Memory Card]), and then specify a directory.
See “Selecting a Device for Operations” (page 785).
4
Using any of the following methods, select the register to which you want
to load, and the file to be loaded.
• To select all files within the list, press [ALL] below the list.
• To select multiple files, turn the knobs to select in the following ranges.
• To select a single file, press the arrow keys to scroll the reverse video
cursor, or press directly on the list in the status area.
5
Press [
T
Load].
This loads the contents of the selected file from the specified location.
(Setup data is first loaded.)
Loading frame memory files
Between steps
3
and
4
of the procedure above, “Loading Files,” do as follows.
1
To select the frame memory folder, press [Default] in the device selection
in the list on the left.
A pull-down menu appears.
2
Press the required folder name.
3
Carry out the same operations as in steps
1
and
2
on the list on the right.
4
Select the type of data to be displayed.
• To display still image files, press [Still].
• To display clip files, press [Clip].
Knob
Parameter
Adjustment
Setting values
1
List L
Select the first register into which the data
is to be loaded
1 to 99
2
List R
Select the first file in which data is held
1 to 99
3
Num
Number to be selected
1 to 99