Sony Multi Interface Shoe Adapter - Manual (Page 452)

Cha
p
te
r 11
DME
O
per
at
ion
s
452
DME Special Effect Operations
Setting the border color
The operation differs depending on the DME used (MVE-8000A/MKS-6470
or MVE-9000).
When the MVE-8000A/MKS-6470 is used
Press [Border Color], turning it on, and set the following parameters.
When the MVE-9000 is used
Use the buttons in the group to select the signal to insert in the
border.
Flat Color: single color
Mix Color: mix color signal set in the Color Mix menu (see page 479)
Ext Video: an external video signal input to the Ext IN connector
If Flat Color is selected, adjust the following parameters.
If Mix Color or Ext Video selected, the border color changes according to the
mix color signal or external video signal.
Softening the border edges
Press [Border Soft], turning it on, and set the following parameters.
Crop Settings
Cropping the image
1
In the DME menu, select VF1 ‘Edge’ and HF1 ‘Border/Crop.’
The Border/Crop menu appears.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Soft Softness of inner side of border 0.00 to 100.00