Sony Multi Interface Shoe Adapter - Manual (Page 534)

Cha
p
te
r 11
DME
O
per
at
ion
s
534
DME Special Effect Operations
Setting the color of the shade in the shade area
1
Turn [Shade Color] on.
2
Adjust the following parameters.
Setting the bar mode of the highlight area
When you select [Bar] in step 3 of “Applying the Lighting effect” (see page
530) , use the following procedure to set the bar mode of the highlight area.
Note
The bar mode of the highlight area is not supported on the MVE-8000A and
MKS-6470.
1
Select the mode in the group.
Normal: Emphasizes the bar highlight area.
Specular: An effect like light striking a surface with metallic reflections.
Mat: An effect like light striking paper, cloth, or another diffusively
reflective surface.
2
Set the following parameters.
a) For SD 4:3 and SD 16:9
b) For HD 4:3
c) For HD 16:9
3
When you select Normal or Mat in step 1 , press [Bar Diffuse Color],
turning it on, and adjust the following parameters to set the color of the
diffuse light area.
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 359.99 to 0.00
Knob Parameter Adjustment Setting values
1 Intensity Intensity of diffuse light area 0.00 to 100.00
2 Offset Offset of center of diffuse light
area
–4.00 to +4.00
a)
–12.00 to +12.00
b)
–16.00 to +16.00
c)
3 Width Width of diffuse light area 0.00 to 100.00
4 Soft Softness of diffuse light area 0.00 to 100.00