Router control menu operations, Checking the list of inputs for each destination, Selecting the level – Sony Multi Interface Shoe Adapter User Manual
Page 335

335
Router Control Menu Operations
Chapt
Router Control Menu Operations
Using the Router >Router Control >Router Control menu, you can carry out
router switching operations.
Checking the List of Inputs for Each Destination
You can check the list of signals currently input for each destination.
1
In the menu control block, press the top menu selection button [RTR], then
select VF1 ‘Router Control’ and HF1 ‘Router Control.’
2
The following menu appears, and the left side of the status area shows a
list for destination assignments.
If in the Assign >RTR Mode Setting menu, [Inhibit] is set to On for a
destination, the corresponding line appears in gray. Also, if [PROT] (protect)
is set to ON for a source, using a BKSR3xxx or R1xxx series Router remote
control, a padlock icon appears.
The right side of the status area shows the level assignment status to the Level
1 to Level 4 buttons.
Selecting the level
In the Level Button No group at the lower right in the above illustration, press
the selected level for switching.