Sony Multi Interface Shoe Adapter User Manual
Page 558
Cha
558
DME Special Effect Operations
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
c) Minus moves forward, plus moves deeper.
d) Minus moves counterclockwise, plus moves clockwise.
6
In the
the light source.
Source:
Place the light source in the source coordinate space. The
spotlight moves when the image moves.
Target:
Place the light source in the target coordinate space. The spotlight
does not move, even when the image moves.
For details of the coordinate space in which to place the light source, see
“Linking and unlinking image and spotlight” (page 548).
To set a test sphere
1
In the Light 1 menu, press [Test Sphere], turning it on.
A test sphere effect appears on the surface of the image.
2
Adjust the following parameter.
a) Light appears from Z direction. At
–
100.00 the light goes deepest, at +100.00 the whole
image is lit like a flat effect.
To select the lighted area
In the group, select one of the following.
FRGD:
The light strikes the image foreground.
BKGD:
The light strikes the image background.
Both:
The light strikes both foreground and background.
For more information about the lighted area, see “Selecting the lighted area”
(page 548).
Knob
Parameter
Adjustment
Setting values
1
X
Movement in X-axis direction
–24.00 to +24.00
a)
2
Y
Movement in Y-axis direction
–24.00 to +24.00
b)
3
Z
Movement in Z-axis direction
–24.00 to +24.00
c)
4
Longitude
Longitude
–8.00 to +8.00
d)
Knob
Parameter
Adjustment
Setting values
5
Amp
Distance of light
–100.00 to +100.00
a)