Sony Multi Interface Shoe Adapter User Manual
Page 425
425
Three-Dimensional Transformation Operations
Chapt
Buttons used when the three-dimensional transform operation
mode is enabled
LOCAL:
Enable operations in the DME local coordinate space.
GLB (global):
Enable operations in the DME global coordinate space.
The [LOCAL] and [GLB] buttons can be selected at the same time.
SRC (source):
Enable operations in the DME source coordinate space.
TRGT (target):
Enable operations in the DME target coordinate space.
The [SRC] and [TRGT] buttons cannot be selected at the same time. When
these buttons are held down, trackball and Z-ring operation is switched to
a finer control. (fine mode)
AXIS LOC (location):
When this button is lit, the trackball moves the
rotational axis of the image in the x-axis and y-axis directions, and the Z-
ring moves the axis in the z-axis direction.
ASP PERS (aspect/perspective):
When the [SRC] button is lit, pressing this
button enables the trackball to control the x-axis and y-axis directions
independently, and the Z-ring controls the x-axis and y-axis directions
together, to vary the aspect ratio. When the [SHIFT] button is held down
and this button is pressed, the trackball controls the skew of the image in
the x-axis and y-axis directions.
When the [TRGT] button is lit, pressing this button enables the trackball
DE
V
USER
M/E1
DME1
DME5
ME
N
U
SHIFT
M/E2
DME2
DME6
ASP
PERS
ROT
AXIS
LOC
W
IPE
LOCAL
K1
CB1
CLR
W
ORK
BUFR
M/E3
DME7
X
P/P
DME
8
Y
Z
CTR
RU
N
CTRL
LOC
SIZE
ASP
LOC
XYZ
LOC
ROT
POS
RSZR
SRC
K3
GLB
K2
TRGT
K4
RSZR
CTRL
Function assignment buttons
Operating buttons
Z-ring
Region selection buttons (DME1, DME 2)
Trackball