Sony Multi Interface Shoe Adapter - Manual (Page 881)

881
Overall Control Panel Settings (Config Menu)
Chap
te
r 1
9
Cont
ro
l P
a
n
e
l
Set
u
p
(
P
a
nel)
• Compact Key Module Assign: You can select which keys can be operated
with an independent key transition control block (simple type).
• M/E Operation Inhibit: For each M/E or PGM/PST bank, enable or inhibit
utility bus-related and key-related operations.
Interchanging the Bank Order or Disabling Operation
1
In the Panel >Config menu, select the Bank you want to set, using any of
the following methods.
• Press directly on the status area display.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The Bank selection here indicates the physical position on the control
panel, numbering from the top as the 1st Row, 2nd Row, 3rd Row, and 4th
Row.
On the MKS-9011 1M/E Control Panel only the 1st Row is valid. On the
MKS-9012 2M/E Control Panel, only the 1st Row and 2nd Row are valid.
2
Select the bank that you want to assign to the selected Bank number in the
group.
The status area shows the interchanged state of the banks.
Notes
• It is not possible to assign the same M/E logical bank to more than one
physical bank. Be sure to make different M/E assignments.
• When the bank order is changed, the state of region selection button
assignment in the numeric keypad control block also changes
correspondingly.
3
For the selected Bank number, in the group, select one
of the following.
Enable: Enable panel display and operation of the bank.
Disable: Enable only panel display, and disable operation of the bank.
Inhibit: Disable both the panel display and operation of the bank.
Note
When this is set to Inhibit, snapshots of the bank are not recalled.
Knob Parameter Adjustment Setting values
1 Bank Select the position of the bank you want
to set 1 to 4