Sony Multi Interface Shoe Adapter User Manual
Page 857
857
Installation and Device Setup (Install/Unit Config Menu)
Chapt
OK:
Installation already completed.
On:
For installation, but not completed.
Error:
An error occurred during installation.
Cancel:
Installation canceled.
Lower list:
For the device selected in the upper list, this shows an
automatically detected list of software that can be installed on the
particular device. Also, software selected as a candidate for
installation in the upper list is marked in the lower list with an bullet.
3
If you are satisfied with the currently installed version of all items in the
upper list, skip to step
6
.
To change the items to be installed, use any of the following methods to
select the relevant device.
• Press directly on the list in the status area.
• Use the arrow keys to scroll the reverse video cursor.
• Turn the knob.
The display of the lower list changes according to the selected device.
To display all related software
Press [Display All Software], turning it on.
Not just the automatically detected software, but the names of all related
software for the selected device appear.
4
In the lower list, select the software you want to install.
• Press directly on the list in the status area.
• Use the arrow keys to scroll the reverse video cursor.
• Turn the knob.
5
Press [Set].
The selection is reflected under “Install” and “Title” in the upper list.
6
Press [Install].
The “Install” box shows “On,” confirming that this is to be installed. To
cancel this installation setting, press “Install” once more, making the box
blank.
Knob
Parameter
Adjustment
Setting values
1
Device
Device selection
1 and upwards
Knob
Parameter
Adjustment
Setting values
3
No
Software selection
1 and upwards