Sony Multi Interface Shoe Adapter - Manual (Page 108)

108
Signal Selection
Chapt
er
3
S
ign
al Sele
c
tio
n
a
nd T
ran
s
itio
n
s
a) To turn on the [DME1] to [DME4] buttons requires one of the [KEY1] to [KEY4] and [DSK1]
to [DKS4] buttons to be on.
Signal Assignment and Selection
Assigning signals to buttons
Each cross-point button has a button number, to which you assign a signal.
In addition to the signals input to the PRIMARY INPUTS 1 to 49 connectors
on the rear panel of the switcher, you can also select signals generated within
the switcher.
Each button has assigned to it a video signal and a key signal, forming a pair.
You can set these video and key combinations in a Setup menu.
For details of Setup menu operations, see “Cross-Point Settings (Xpt Assign
Menu)” in Chapter 19 (Volume 3).
Auxiliary
bus control
block AUX1 to AUX48 buses The key row of
the bank selected
with the bank
selection buttons
in the auxiliary
bus control block
Turn on the appropriate
buttons in accordance with
the signal assignment made
in the Setup menu.
MONITOR 1 to
MONITOR 8 buses
Frame memory source
1 and frame memory
source 2 buses
DME 1 and DME 2
video buses
DME 1 and DME 2
key buses
Edit preview bus
M/E-1 UTILITY bus
P/P UTILITY 1 and P/
P UTILITY 2 buses
M/E-1 Key 1 fill to M/
E-1 Key 4 fill buses
M/E-1 Key 1 source to
M/E-1 Key 4 source
buses
DSK 1 fill to DSK 4 fill
buses
DSK 1 source to DSK
4 source buses
M/E-1 external DME
bus
P/P external DME bus
Bank Bus name Cross-point
button row Delegation operation