HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 717)

01.98
TNC 407/TNC 415/TNC 425 2 Mounting and electrical installation 11-3
2 Mounting and electrical installation
The connection conditions are the same as for the TNC 415 B´ – the differences between TNC 425
and TNC 415 B are explained in the following sections.
2.1 Hardware
The TNC 425 consists of the following hardware components:
•
LE 425 (logic unit)
•
TE 400 (TNC control panel)
•
BC 110 B (VDU)
•
PL 410 (max. 2 PLC I/O units as option)
The following Identification Numbers have been allocated for the LE 425 so far:
ID Number Logic Unit Modification
267 214 19 LE 425
267 214 24 LE 425 with "Digitise TS 120" module
267 214 28 LE 425 E
267 214 38 LE 425 E Export
267 214 39 LE 425 Standard
267 214 44 LE 425 with "Digitise TS 120" module
267 214 47 LE 425 with "Digitise TM 110" module
267 214 48 LE 425 E Export
267 214 49 LE 425 Standard
267 214 54 LE 425 with "Digitise TS 120" module
267 214 57 LE 425 with "Digitise TM 110" module
267 214 58 LE 425 E Export
267 214 59 LE 425 Standard
Identification number for software module "Digitizing with TS 120": 246 051 01