HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 440)

5-38
TNC 407/TNC 415/TNC 425 3 List of machine parameters 01.98
Machine
parameter Function and input Change
via Reaction Page
MP7295 Inhibit datum setting
Entry: %xxxxx
Bit 0 X axis0 = not disabled
Bit 1 Y axis1 = disabled
Bit 2 Z axis
Bit 3 4th axis
Bit 4 5th axis
PLC RUN
CN 123 4-127
MP7296 Set datum with axis keys
Entry: 0 or 1
0 = datum can be set with axis keys and soft key
1 = datum can be set with soft key only PLC RUN
CN 123 4-128
MP7300 Cancel Status-display and Q-parameters
Entry: 0 to 7
0 = Cancel status display and Q parameters and
tool data when program is selected
1 = Cancel status display, Q parameters and tool
data with M02, M30, END PGM and when
program is selected
2 = Cancel status display and tool data when
program is selected
3 = Cancel status display and tool data when
program is selected and with M02, M30, END
PGM
4 = Cancel status display and Q parameters when
program is selected
5 = Cancel status display and Q parameters when
program is selected and with M02, M30, END
PGM
6 = Cancel status display when program is
selected
7 = Cancel status display when program is
selected and with M02, M30, END PGM
PLC RUN
CN 123 4-140