HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 577)

7-116
TNC 407/TNC 415/TNC 425 3 Commands 01.98
3.14.3 Storing a STRING (=)
Abbreviation for PLC Editor: =
Execution time [µs] < 80
Number of bytes STRING memory 10
Immediate STRING —
STRING from error message or dialogue files —
Operands: S
Operation:
With the = command a STRING from the STRING Accumulator is stored in a STRING memory. The
selection of the memory, into which the STRING should be copied, proceeds using the Argument
after the operand designation. Whereby only the Arguments 0 – 3, which address a STRING
memory (S0 – S3) are valid here.
Refer also to operand explanation.
3.14.4 Overwriting of a STRING (OVWR)
Abbreviation for PLC Editor: OVWR (OVERWRITE)
Execution time [µs] < 80
Number of bytes STRING memory 10
Immediate STRING —
STRING from error message or dialogue files —
Operands: S
Operation:
With the OVWR command a STRING from the STRING Accumulator is stored in a STRING memory.
This command functions in a similar manner to the = command, with the difference that the
character "STRING-End" is not transferred alongside. By this means, the beginning of a STRING
which is already in the STRING memory, can be overwritten.
The selection of the memory, into which the STRING should be copied, proceeds using the
Argument after the operand designation. Whereby only the Arguments 0 – 3, which address a
STRING memory (S0 – S3) are valid here.
Refer also to operand explanation.