HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 255)

4-130
TNC 407/TNC 415/TNC 425 6 Display and operation 01.98
6.2 Colour adjustment
The BC 110 is a 14 inch colour-graphics screen with a resolution of 640 x 490 pixels. The colours in
the screen-display can be selected by machine parameter. For example, the colours can be adjusted
to suit the corporate image of the machine tool builder image or the design of the machine.
The following colour adjustments cannot be altered by machine parameters:
–
HEIDENHAIN company logo after switching on the machine (GREEN),
– flashing error messages (RED),
– error message for invalid machine parameter (RED),
– plan view in the graphics display (BLUE),
– cursor (always inverse).
The entry values for colour adjustment are byte-oriented. The preferred entry is hexadecimal.
Colour Red Green Blue
HEX Ranges 0 to 3 0 to F 0 to 3 0 to F 0 to 3 0 to F
Adjustment coarse fine coarse fine coarse fine
Entry for yellow:
$0.... 3 9 3 9 0 0
Since it is possible to make mistakes when setting the colours (e.g.. red error messages on red
background), HEIDENHAIN recommends a standard colour-adjustment. This standard colour setting
is the setting generally used by HEIDENHAIN and is prompted by the control system when creating
the MP list.
The standard colour-adjustment is given in the following list.
Machine Colour for ... Standard colour-adjustment
parameter
MP7350 Window frame $030200C
MP7351 Error messages $03F3F0F
MP 7352 Operating-mode display "Machine"
MP7352.0 Background $0000000
MP7352.1 Text for operating mode $0342008
MP7352.2 Dialogue $03F3828
MP7353 Operating-mode display "Programming"
MP7353.0 Background $0000000
MP7353.1 Text for operating mode $0342008
MP7353.2 Dialogue $03F3828
MP7354 Program-text display "Machine"
MP7354.0 Background $0080400
MP7354.1 General program-text $038240C
MP7354.2 Current block $038341C
MP7354.3 Background not active window $00C0800