HEIDENHAIN TNC 407 (243 020) Technical Manual User Manual
Page 412

Machine
parameter
Function and input
Change
via
Reaction
Page
Compensation per control loop cycle time
Entry: 0.000000 to 99.999999 [mm]
Compensation for reversal spikes in circular
interpolation (M105)
Entry: –1.0000 to +1.0000 [mm]
Compensation per control loop cycle time (M105)
Entry: 0.000000 to 99.999999 [mm]
Linear axis-error compensation
Entry: –1.0000 to +1.0000 [mm/m]
Selection of linear or non-linear axis error
compensation
Entry: %xxxxx
Linear axis error compensation
This manual is related to the following products: