HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 421)

01.98
TNC 407/TNC 415/TNC 425 3 List of machine parameters 5-19
Machine
parameter Function and input Change
via Reaction Page
MP1720 Position monitoring for operation with lag
(EMERGENCY STOP)
Entry: 0.0000 to 300.0000 [mm]
MP1720.0 X axis
MP1720.1 Y axis
MP1720.2 Z axis
MP1720.3 4th axis
MP1720.4 5th axis
PLC EDIT 4-84
MP1810 k
v
factor for operation with lag
Entry: 0.100 to 20.000 [
m/min
mm
]
MP1810.0 X axis
MP1810.1 Y axis
MP1810.2 Z axis
MP1810.3 4th axis
MP1810.4 5th axis
PLC EDIT 4-70
MP1815 k
v
factor for operation with lag activated by M105
Entry: 0.100 to 20.000 [
m/min
mm
]
MP1815.0 X axis
MP1815.1 Y axis
MP1815.2 Z axis
MP1815.3 4th axis
MP1815.4 5th axis
PLC EDIT 4-70
MP1820 Multiplication factor for kv
Entry: 0.001 to 1.000
MP1820.0 X axis
MP1820.1 Y axis
MP1820.2 Z axis
MP1820.3 4th axis
MP1820.4 5th axis
PLC EDIT 4-72
MP1830 Kink point
Entry: 0.000 to 100.000 [%]
MP1830.0 X axis
MP1830.1 Y axis
MP1830.2 Z axis
MP1830.3 4th axis
MP1830.4 5th axis
PLC EDIT 4-72