HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 423)

01.98
TNC 407/TNC 415/TNC 425 3 List of machine parameters 5-21
Machine
parameter Function and input Change
via Reaction Page
MP1950 Polarity for torque signal
Entry: %xxxxx
0 = positive
1 = negative 11-10
MP1951 Select measuring system for position control
Entry: %xxxxx
0 = linear measuring system for position control
1 = motor rotary encoder for position control 11-10
MP1955 Ratio of grating period LS to ROD
Entry: 0.1 to 100
MP1955.0 X axis
MP1955.1 Y axis
MP1955.2 Z axis
MP1955.3 4th axis
MP1955.4 5th axis
11-10
MP1960 Compensation for reversal spikes
Entry: –1.0000 to +1.0000
MP1960.0 X axis
MP1960.1 Y axis
MP1960.2 Z axis
MP1960.3 4th axis
MP1960.4 5th axis
11-11
MP1970 Motion monitor for position and speed
Entry: 0 to 300.0000 [mm]
0 = no monitor
MP1970.0 X axis
MP1970.1 Y axis
MP1970.2 Z axis
MP1970.3 4th axis
MP1970.4 5th axis
11-11
MP1980 Delayed shutdown of speed controller in
EMERGENCY STOP
Entry: 0 to 1.9999 [sec] 11-11