HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 419)

01.98
TNC 407/TNC 415/TNC 425 3 List of machine parameters 5-17
3.3 Operation with feed precontrol
Machine
parameter Function and input Change
via Reaction Page
MP1410 Position monitoring in operation with feed
precontrol (cancellable)
Entry: 0.0010 to 30.0000 [mm]
MP1410.0 X axis
MP1410.1 Y axis
MP1410.2 Z axis
MP1410.3 4th axis
MP1410.4 5th axis
PLC EDIT 4-85
MP1420 Position monitoring in operation with feed
precontrol (EMERGENCY STOP)
Entry: 0.0010 to 30.0000 [mm]
MP1420.0 X axis
MP1420.1 Y axis
MP1420.2 Z axis
MP1420.3 4th axis
MP1420.4 5th axis
PLC EDIT 4-85
MP1510 kv factor for feed precontrol
Entry: 0.100 to 20.000 [
m/min
mm
]
MP1510.0 X axis
MP1510.1 Y axis
MP1510.2 Z axis
MP1510.3 4th axis
MP1510.4 5th axis
PLC RUN 4-76
MP1511 Factor for stiction compensation
Entry: 0 to 16 777 215
MP1511.0 X axis
MP1511.1 Y axis
MP1511.2 Z axis
MP1511.3 4th axis
MP1511.4 5th axis
PLC RUN 4-33
MP1512 Limit of extent of stiction compensation
Entry: 0 to 16 777 215 [counting steps]
MP1512.0 X axis
MP1512.1 Y axis
MP1512.2 Z axis
MP1512.3 4th axis
MP1512.4 5th axis
PLC RUN 4-33