HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 409)

01.98
TNC 407/TNC 415/TNC 425 3 List of machine parameters 5-7
Machine
parameter Function and input Change
via Reaction Page
MP40 VDU display
Entry: %xxxxx
Bit 0 X axis 0 = not active
Bit 1 Y axis 1 = active
Bit 2 Z axis
Bit 3 4th axis
Bit 4 5th axis
PLC RUN 4-14
MP50 Controlled axes
Entry: %xxxxx
Bit 0 Axis X 0 = not controlled
Bit 1 Axis Y 1 = controlled
Bit 2 Axis Z
Bit 3 4th Axis
Bit 4 5th Axis
PLC RUN 4-89
MP60 PLC auxiliary axes
Entry: %xxxxx
Bit 0 Axis X 0 = NC axis
Bit 1 Axis Y 1 = PLC axis
Bit 2 Axis Z
Bit 3 4th Axis
Bit 4 5th Axis
PLC RUN 4-38
MP110.0-4 Assignment of the measuring system inputs
to the axes
Entry: 0 to 5
0 = measuring system input X1
1 = measuring system input X2
2 = measuring system input X3
3 = measuring system input X4
4 = measuring system input X5
5 = measuring system input X6
MP110.0 X axis
MP110.1 Y axis
MP110.2 Z axis
MP110.3 4th axis
MP110.4 5th axis
RESET 4-13