HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 232)

01.98
TNC 407/TNC 415/TNC 425 4 Main Spindle 4-107
A separate k
v
-factor for each gear range can be entered in MP3440 for a more exact control of the
spindle orientation. A display of the spindle position is activated with MP40. The spindle position is
displayed only if neither M03 nor M04 is active. It is displayed as a value below 360 degrees.
Orientation from rotation:
S
[rpm]
t
Prog. rpm
M19
MP3410.1
MP3410.1
0
RPM for
orientation
Distance
to target position
Target
position
Orientation from standstill:
S
[rpm]
t
M05 Target
position
M19
0
MP3410.0
MP3410.1
Stand-
still
Prog. rpm
RPM for
orientation