HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 256)

01.98
TNC 407/TNC 415/TNC 425 6 Display and operation 4-131
MP7355 Program-Text-display "Programming"
MP7355.0 Background $0080400
MP7355.1 General program-text $038240C
MP7355.2 Current block $038341C
MP7355.3 Background not active window $00C0800
MP7356 Status- and PLC-window
MP7356.0 Background $00C0800
MP7356.1 Axis positions in the status-display $03F2C18
MP7356.2 Status-display, except axis positions $03F280C
MP7357 Soft key display "Machine"
MP7357.0 Background $0000000
MP7357.1 Symbols $03F3828
MP7358 Soft key display "Programming"
MP7358.0 Background $0000000
MP7358.1 Symbols $03F3828
MP7360 Graphics: 3D-view
MP7360.0 Background $0000000
MP7360.1 Top surface $0203038
MP7360.2 Front face $00C1820
MP7360.3 Text-display in graphics window $03F3F3F
MP7360.4 Side face $0102028
MP7361 Graphics: view in three planes (and Oscilloscope)
MP7361.0 Background $0000000
MP7361.1 Plan (Grid) $0203038
MP7361.2 Front and side view (not selected
channel)
$0203038
MP7361.3 Cross-axes and text in
graphics-display
(Cursor, data, screen window)
$03F3F3F
MP7361.4 Cursor (selected channel) $03F0000
MP7362 Additional status-display in graphics window
MP7362.0 Background graphics window $0080400
MP7362.1 Background status display $00C0800
MP7362.2 Status symbols $038240C
MP7362.3 Status values $03F2C18
MP7363 Interactive graphics
MP7363.0 Background $0000000
MP7363.1 Resolved contour $03F3F3F
MP7363.2 Subprograms and frame for zoom $0003F00
MP7363.3 Alternative solutions $0003F00
MP7363.4 Unresolved contour $03F0000