HEIDENHAIN TNC 407 (243 020) Technical Manual User Manual
Page 425

Machine
parameter
Function and input
Change
via
Reaction
Page
Axis-halt on TOOL CALL with only a spindle
speed output
Entry: 0 or 1
1 = No axis-halt on TOOL CALL
0 = Axis-halt on TOOL CALL
Zero spindle speed permitted
Entry: 0 or 1
0 = 0 rpm permitted
1 = 0 rpm not permitted
Polarity of the S-analogue voltage
Entry: 0 to 3
2 = M03 and M04 positive voltage
3 = M03 and M04 negative voltage
S-analogue voltage for gear range
Entry: 0 to 9.999 [V]
Minimum S-analogue voltage output
Entry: 0 to 9.999 [V]
Jog-voltage for gear change
Entry: 0 to 9.999 [V]
Limit with S-override (maximum)
Entry: 0 to 150 [%]
Limit with S-override (minimum)
Entry: 0 to 150 [%]
Spindle ramp gradient for M03, M04, M05
Entry: 0 to 1.9999 [V/ms]
Spindle ramp gradient for spindle orientation
Entry: 0 to 1.9999 [V/ms]
Spindle ramp gradient for tapping
Entry: 0 to 1.9999 [V/ms]
Spindle ramp gradient for rigid tapping
Entry: 0 to 1.9999 [V/ms]